Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Scottsdale Homeowners
A chimney that has never been looked at from the inside is a chimney you’re trusting on faith. In Scottsdale, where fireplaces run through cool desert evenings and then sit idle for months, creosote keeps building in layers you can’t see from the hearth – and small cracks in a flue can widen quietly between seasons. Our chimney inspection answers the question with evidence: a camera sweep of the flue, photos of what we found, and a written report you keep. Our technicians have up to experience, and we’re a chimney-only operation, so the same company that inspects your system can sweep and repair it. Call (888) 340-2124 to book an inspection.
Fireplace Inspection
Fireplace Inspection is the part of the job that looks at the firebox itself – the brickwork, mortar joints, damper, smoke shelf, and the face of the opening – rather than just the flue above it. You need one when you’ve bought a home with a fireplace you’ve never burned, when smoke rolls into the room instead of up the chimney, or when the firebox lining looks cracked or crumbly. Scottsdale Chimney Sweep inspects the firebox with a bright work light and a mirror, photographs every fault we find, and hands you the images before we recommend anything. A fireplace inspection in Scottsdale typically runs $99-$250, depending on whether it’s paired with a sweep, and the written estimate sets the final price. Request a free estimate whenever you’re ready.
What We Look At in the Firebox
We check mortar joints for recession, look for cracks in the firebrick or refractory panels, and test the damper for smooth travel and a tight seal. A failed firebox lining can let heat reach the structure behind it, so this part of the inspection matters as much as the flue.
Smoke Problems and Draft
If smoke spills into the room, the cause is usually a draft issue: a flue that’s too short for the fireplace opening, a blockage, or a smoke shelf packed with debris. We trace the draft with a smoke test rather than guessing, then tell you what will actually fix it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole system – crown, cap, flashing, exterior masonry, flue, firebox, and the connections in between – and they’re what you book before a season of burning, after a chimney fire, or when you’re buying a house. You need them any time the chimney’s condition is unknown, and especially after a storm or a long idle stretch. Scottsdale Chimney Sweep handles inspection, sweeping, and repair as one company, working with professional-grade lines including DuraFlex and HeatShield, so a finding doesn’t send you hunting for a second contractor. Chimney inspection services in Scottsdale typically cost $99-$350 for a visual inspection and more for a full Level 2 with camera, depending on access and how much of the system needs documenting. Call us for an exact quote.
Visual Versus Camera Inspection
A visual inspection covers everything reachable by eye and hand at the firebox and from the roof, which catches most exterior and firebox faults. When the flue interior needs proof, we move to a camera and record what it sees.

What the Written Report Includes
You get photos of each finding, a plain description of what it means, and a prioritized list of what should be addressed now versus what can safely wait. Nothing gets recommended without a photo behind it.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the passage your smoke travels through – the liner, the joints between liner sections, and any offset or transition inside the stack. You need it whenever the liner’s condition is unknown, after a chimney fire, or if you’ve noticed a burnt smell or debris falling into the firebox. Scottsdale Chimney Sweep runs a camera down the flue to check for cracked tiles, gaps at the joints, and separation in a stainless liner, then documents the footage and walks you through it. A flue inspection in Scottsdale typically runs $150-$400 depending on flue length, roof access, and whether a camera is needed, with the written estimate setting the final price. Call (888) 340-2124 to schedule.
Liner Condition and Joint Gaps
Clay tile liners crack at the joints over time, and a gap the width of a fingernail is enough to let heat and gases reach the masonry around it. We look for those gaps and photograph them so you can see the size for yourself.
When a Liner Needs Resurfacing
Some deteriorated liners can be restored rather than replaced. HeatShield resurfacing is applied by trained applicators and rebuilds the liner’s inner surface, and we’ll tell you plainly when that’s appropriate and when a full liner replacement is the honest answer.
Chimney Fire
Chimney Fire is what happens when the creosote lining your flue ignites, and it can burn hot enough to crack tile, warp a damper, or damage the masonry around the flue without anyone noticing from inside the house. You need an inspection after any suspected chimney fire, and the warning signs include a loud roaring or popping sound, a sudden shower of black flakes, or a smell of burnt creosote that lingers. Scottsdale Chimney Sweep inspects the flue after a fire with a camera, documents any damage to the liner and masonry, and tells you whether the chimney can be used again without repair. Post-fire inspection in Scottsdale typically costs $150-$400, depending on what needs documenting and the extent of the damage. Don’t burn again until we’ve looked – call us for a free estimate.
Recognizing a Chimney Fire
Many chimney fires are quiet and go unnoticed; others announce themselves with a roar and a vibration in the flue. Either way, the fire damages the liner, and the damage is often invisible from the firebox.
Why Damage Often Stays Hidden
A cracked flue tile behind the masonry won’t show itself until smoke or heat escapes into the structure. A camera inspection is the only reliable way to confirm the flue survived, which is why we don’t advise burning again until we’ve looked.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the inspection standard for a home sale, a change of fuel type, a chimney fire, or any time the flue’s interior condition needs documenting – it goes beyond the basic visual check and includes a video scan of the flue. You need one when a transaction depends on it, when you’re switching from wood to gas or the reverse, or when an earlier inspection turned up something that needs a closer look. Scottsdale Chimney Sweep performs Level 2 inspections with a flue camera and produces a written report with photos that satisfies insurers and real estate transactions. A Level 2 inspection in Scottsdale typically runs $250-$450 depending on flue configuration, roof access, and how many appliances connect to the chimney. Ask us what the report will cover for your home.
When a Level 2 Is Required
Real estate transactions, insurance requirements, and any change in fuel type are the common triggers. After a chimney fire or an earthquake, a Level 2 is the standard way to confirm the flue is intact.
What Makes It Different
A Level 2 adds a video scan of the entire flue and access to concealed areas like the attic and crawl space where the chimney passes through. It’s the inspection that documents, not just observes.
Chimney Leak
Chimney Leak usually isn’t the flue – it’s water getting in at the crown, the flashing, or the cap, then traveling down the masonry and appearing as a stain on the ceiling or a rust streak on the firebox. You need an inspection when you see water staining, efflorescence (the white powder on brick), or a musty smell near the chimney after a storm. Scottsdale Chimney Sweep inspects the crown, flashing, and cap, checks the masonry joints for absorption, and identifies the entry point before recommending a fix. A leak inspection in Scottsdale typically costs $150-$350 depending on access and how much of the exterior needs closer examination, and the written estimate sets the final price. Call for a free estimate and we’ll tell you where the water is coming in.
Crown, Flashing, and Cap
The crown sheds water away from the flue, the flashing seals where the chimney meets the roof, and the cap keeps rain and animals out. Most leaks trace back to one of these three, and each shows its failure differently.
Tracing Water to Its Entry Point
Water travels along masonry and can surface far from where it entered. We follow the staining and the joints rather than guessing, so the repair addresses the actual source instead of the visible symptom.
Chimney Camera Inspection
Chimney Camera Inspection is a video scan of the flue’s interior, recorded so you can watch the footage and see the defects yourself instead of taking a technician’s word for it. You need one when the flue’s condition is unknown, when a prior inspection flagged something, or when you want proof of condition before a home purchase or insurance renewal. Scottsdale Chimney Sweep runs a camera from the top of the flue to the firebox, records the full pass, and narrates what’s on screen as it goes. A camera inspection in Scottsdale typically runs $150-$400 depending on flue length and the number of connected appliances, with the written estimate setting the final price. Book a camera inspection and see what we see.
What the Camera Reveals
It shows cracked tile, gaps at the joints, spalling, offset sections, and the condition of a stainless liner. These are the defects a visual check from the firebox can’t reach.
Recorded Footage You Keep
The recording is yours to keep and share with a real estate agent, insurer, or another contractor. If a finding needs a second opinion, you have the footage to get one.
Brands We Service
We work with professional-grade product lines, and each one has its own wear patterns. DuraFlex flexible liners are the go-to for flues that need a continuous stainless solution where the existing liner was deteriorated or mismatched, and we know where the seams and connections on a DuraFlex install are most likely to need attention. HeatShield, the industry’s leading resurfacing system, requires trained applicators, and we’re equipped to apply it when a liner can be restored rather than replaced. Famco products turn up in chimney caps and venting, and we know how those assemblies hold up in the desert climate over time.
We service Copperfield components as well, and we check their fit and condition as part of a full inspection rather than treating them as an afterthought. Whether you have DuraFlex, HeatShield, Famco, Copperfield, or any other make, we can help. Ask us which product we’d use on your chimney and why – we’ll give you the straight answer.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room. A fireplace that spills smoke instead of drafting up the flue usually has a blockage, an undersized flue, or a damaged smoke shelf. It won’t fix itself with more wood, and it’s worth a look before your next fire.
- Soot or creosote flakes falling into the firebox. Falling debris means the flue lining is shedding, which points to a cracked or deteriorated liner. That’s a stop-burning signal until it’s inspected.
- A burnt, acrid smell when the fireplace isn’t in use. Creosote gives off that smell on warm days, and a strong one suggests heavy buildup in the flue. Sweeping before the next burn is the sensible move.
- Water stains or white powder on the chimney exterior. Efflorescence and staining mean moisture is getting into the masonry, usually through the crown or flashing. The longer it’s wet, the more of the chimney it damages.
- A chimney fire you suspect – even a small one. A loud roar, popping sound, or a sudden shower of black flakes is a chimney fire, and the liner needs a camera inspection before you burn again. Don’t wait for the next season.
Our Process, Step by Step
- 1
Book and confirm. Call (888) 340-2124, describe the fireplace and what you’ve noticed, and we’ll schedule the inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
Protect the room. We lay drop cloths around the hearth and set up a containment for soot before any tool goes near the firebox. The room looks the same when we leave as when we arrived.
- 3
Inspect the system top to bottom. We check the crown, cap, and flashing from the roof, work the firebox and damper from inside, and run a camera down the flue to record the liner’s condition. Nothing gets skipped because the outside looked fine.
- 4
Document and explain. We show you the photos and footage and walk through what each finding means in plain terms. You hear the honest answer, including when work can safely wait.
- 5
Recommend only what’s needed. If repair is needed, we specify the material – a DuraFlex liner, a HeatShield resurfacing, or a targeted masonry repair – and put the price in a written estimate before anything is ordered. The estimate is free and the final price is set by it.
How Much Does Chimney Inspection Cost in Scottsdale?
A typical chimney inspection in Scottsdale runs $99-$350 for a visual inspection, and a full Level 2 with camera and written report typically runs $250-$450. If you pair the inspection with a sweep, the combined cost often sits in the $150-$350 range, depending on how much creosote has built up and how accessible the flue is. A camera-only flue inspection runs $150-$400, and a leak inspection or post-fire inspection typically falls between $150 and $400 based on access and how much needs documenting. Line items to expect on the estimate: inspection or camera fee, sweep if requested, and any repair work quoted separately after findings.
What moves the price: roof pitch and access, the number of appliances connected to the chimney, whether the flue has offsets that slow a camera pass, and how much verification a home-sale or insurance report needs. To avoid overpaying, ask for the report format before you book, insist on photos with every finding, and get the estimate in writing before any repair is ordered. Our estimates are free and the price is set per job by the written estimate, so you know the number before work starts. Call (888) 340-2124 for an exact quote.
Our Service Area Near Scottsdale
We book chimney inspections across the East Valley and the communities around it, including Phoenix, Tempe, Mesa, Glendale, Peoria, Youngtown, and Wittmann, plus outlying spots like Black Canyon City and Tonto Basin. Closer in, we cover neighborhoods throughout Scottsdale, from the older homes near Old Town to the newer builds north of Shea. A sweep or inspection is booked into the next available slot, and we confirm timing when you call.
Serving Scottsdale, AZ – Our Local Coverage Area
We serve Scottsdale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Scottsdale
A chimney inspection is an examination of the whole chimney system – firebox, damper, flue, crown, cap, and flashing – to confirm it’s safe to use and document its condition. It goes beyond a sweep, which removes creosote, because an inspection looks for damage the creosote was hiding. The result is a written report with photos you keep. Call (888) 340-2124 for a free estimate.
Most inspections take 45 minutes to an hour and a half, depending on roof access and whether a camera pass is needed. A Level 2 with video and a full written report can run closer to two hours. We book the slot in advance so you know how much of the day to set aside. Call us to schedule.
A typical chimney inspection in Scottsdale runs $99-$350 for a visual check, and a full Level 2 with camera and report runs $250-$450. Pairing it with a sweep often brings the combined total into the $150-$350 range. The written estimate sets the final price, and our estimates are free. Call (888) 340-2124 for an exact quote.
Yes – we work with DuraFlex flexible liner systems and HeatShield resurfacing, along with Famco and Copperfield components. HeatShield in particular requires trained applicators, and we’re equipped to apply it when a liner can be restored instead of replaced. If a repair is needed, we’ll tell you which product we’d use and why. Call us to talk through your system.
Same-day service can often be arranged when you call and a slot is open. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday – we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (888) 340-2124 to check availability.
Yes – inspection findings and any repair the work performed are backed by our satisfaction guarantee, and we stand behind the workmanship. If something we documented or installed doesn’t hold up, we’ll come back and make it right. Ask us to spell out the warranty terms on the written estimate before you book. Call for details.
Clear the hearth and the floor in front of the fireplace, and move anything breakable away from the opening. Don’t burn for at least 24 hours before the appointment so the flue is cool and the camera can pass cleanly. If you have prior inspection reports or the home’s fireplace documentation, have them handy – it helps us spot changes. Call (888) 340-2124 to book.
Schedule Your Chimney Inspection Service in Scottsdale Today
If your fireplace has gone a season or more without a look inside, book the inspection and get the proof in writing. We document what we find before we recommend anything, and our estimates are free and no-obligation. Call (888) 340-2124. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Sweep, inspect, repair – handled by one company, start to finish.
Written by the team at Scottsdale Chimney Sweep.