Chimney Liner & Rebuild Cost in Scottsdale - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (888) 340-2124

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 340-2124

How Much Does Chimney Liner & Rebuild Cost in Scottsdale?

A stainless liner installation in Scottsdale typically runs $3,200 to $7,800, and a partial chimney rebuild usually lands between $4,500 and $14,000 depending on how much masonry has to come down. A full tear-down and rebuild of a chimney above the roofline generally starts around $12,000 and can reach $25,000 or more on a large two-story stack. Those ranges cover materials, labor and hauling. The written estimate you receive after an inspection sets the final price, because a liner and a rebuild are two different jobs with two different scopes.

We treat a chimney as a system: flue, crown, flashing, masonry and cap all have to work together. That’s why we document what we find before we recommend anything. If the flue itself is sound but the crown is cracked, you don’t need a rebuild. If the masonry is failing through several courses, a liner alone won’t fix it. The pricing below reflects that diagnostic-first approach, and it reflects what jobs actually cost in the Scottsdale market in 2026.

Key Takeaways

  • Stainless steel liner installation: roughly $3,200 to $7,800 in Scottsdale.
  • HeatShield resurfacing (a liner repair alternative): about $1,400 to $3,600.
  • Partial chimney rebuild: about $4,500 to $14,000.
  • Full chimney rebuild above the roofline: $12,000 to $25,000+.
  • The written estimate after inspection is the final word on price. Estimates are free.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the numbers break down for Scottsdale homes. Each line is a typical estimated range, not a quote. Your actual price depends on flue size, roof pitch, access, and how much of the existing chimney can be saved.

Line item Typical 2026 range (Scottsdale)
Level 2 chimney inspection (documented findings) $250 – $550
Basic sweep and flue cleaning (prerequisite to liner work) $200 – $400
HeatShield resurfacing of a damaged flue $1,400 – $3,600
Flexible stainless liner – single-story, straight flue $3,200 – $5,400
Flexible stainless liner – two-story home or offset flue $4,800 – $7,800
Insulation wrap around the liner $400 – $900
Crown rebuild or crown coat $600 – $2,200
Flashing replacement $450 – $1,200
Partial chimney rebuild (top courses, above roofline) $4,500 – $14,000
Full chimney rebuild (tear down to roofline and rebuild) $12,000 – $25,000+
New chimney cap with spark screen $250 – $700

What pushes a job toward the top of those ranges: a clay flue that’s cracked through more than one section, an offset or jog in the flue that forces a flexible liner around a bend, a steep roof pitch that slows the work, and masonry that’s deteriorated past the point where resurfacing holds. What keeps a job lower: a straight flue, easy roof access, a crown that just needs coating rather than replacement, and a flue that can be saved with HeatShield instead of relined from top to bottom.

DuraFlex liner systems are one of the product lines we work with, and they’re a strong fit for deteriorated or mismatched flues where a rigid liner won’t follow the path. Olympia Chimney and Copperfield liners are also in the toolkit. The right choice depends on the flue, not on which brand is easiest to install. Ask us which liner we’re using and why. We’ll tell you exactly.

Want to talk it through?Free estimate, price agreed before work starts
Call (888) 340-2124

What Affects Chimney Liner & Rebuild Pricing in Scottsdale

Two Scottsdale homes on the same street can get very different quotes for the same-sounding job. Here’s what moves the number.

  • Flue condition and liner type. A clay flue that’s intact but has a rough interior can often be resurfaced with HeatShield, a system only trained applicators are qualified to install. A flue with cracked or missing tiles usually needs a full stainless reline. That’s a $2,000-plus difference in scope, and it’s the single biggest driver of cost.
  • Roof pitch and height. A steep-pitch roof on a two-story home in the foothills takes longer to work on safely than a low-pitch roof on a single-story house. Height, pitch and access all affect labor.
  • Masonry deterioration. How much of the chimney has to come down is the whole ballgame on a rebuild. A rebuild that stops a few courses above the roofline costs far less than one that goes down to the flashing or below.
  • Flue offsets and shape. A straight vertical flue is simple. A flue with a jog, or one that’s square or oval, calls for a flexible liner and more time to install correctly.
  • Insulation and code clearances. Liner insulation improves performance and is often required to meet clearance standards. It adds to the liner cost but saves you a second visit later.
  • Materials and finish. Standard brick and mortar on a rebuild is one line; matching existing stone or a custom crown adds cost. We’ll show you the material choices before anyone orders anything.

One local factor matters more than most people expect: the Scottsdale sun. Intense summer heat and the wide day-to-night temperature swings through the cooler months put steady stress on mortar, crowns and flashing. A crown that’s checked and sealed early is a lot cheaper than a rebuild later. That’s not a scare tactic; it’s just how masonry behaves in this climate. Regular inspection catches the small stuff before it becomes structural.

Liner Repair vs. Rebuild: Which Does Your Chimney Need?

Most homeowners come to us unsure whether they need a liner repair, a liner replacement, or a rebuild. The answer comes from an inspection, not a guess. We do a documented Level 2 inspection, note what we find, and explain the options.

A flue with cracks, spalling or gaps but sound surrounding masonry is a candidate for HeatShield resurfacing or a flexible DuraFlex liner. A chimney with crumbling mortar joints, leaning courses or a failed crown is a rebuild candidate, and a liner installed inside failing masonry is money spent twice. When the masonry fails, the liner fails with it. That’s why a rebuild normally includes a new liner and why we won’t recommend a liner on top of a chimney that can’t hold it.

If you’re not sure where your chimney falls, start with a chimney inspection in Scottsdale. The inspection tells you which job you actually need, and the report gives you something in writing.

How to Save on Chimney Liner & Rebuild

You can’t avoid the cost of a liner or a rebuild if your chimney needs one, but you can avoid paying for work you don’t need.

  1. Get a documented inspection first. A written report tells you what’s failing and what’s fine. Skipping this step is how homeowners end up paying for a full reline when a HeatShield coat would have done the job.
  2. Catch crown damage early. A crown coat runs a fraction of a rebuild. Have the crown checked when you have the chimney swept.
  3. Sweep before you reline. A clean flue is a condition of a proper liner install, and a chimney sweep in Scottsdale is far cheaper than discovering the flue wasn’t clean after the liner is in.
  4. Ask for a scope in writing. Know exactly what’s included: liner grade, insulation, cap, crown, flashing. Apples-to-apples estimates are the only way to compare.
  5. Fix the flashing at the same time. Water is the leading cause of chimney damage in this climate. Replacing flashing during a rebuild costs less than a separate visit later.
  6. Bundle the small stuff. If the cap is rusted through or the crown is cracked, handle it during the same appointment as the liner or sweep. It’s more efficient for everyone.

Every visit starts the same way: we look, we document, we explain. Estimates are free, so there’s no reason to guess at the number. Call (888) 340-2124. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 340-2124

What Happens When You Call

We book an inspection, not a sales visit. A technician looks at the flue from the firebox up and from the roof down, checks the crown, flashing and masonry, and writes down what’s there. You get findings in plain language and an estimate in writing. The written estimate sets the final price, and the price is set per job. You don’t commit to anything until you’ve seen the scope.

Our technicians have up to experience, and every one of them works on chimneys only. We’re a chimney specialist, not a general handyman operation. That focus is why we can tell the difference between a flue that needs HeatShield and one that needs a full DuraFlex liner without guessing. It’s why we stock the professional-grade product lines (HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, Copperfield) that let us treat the chimney as a system rather than patch one problem and walk away.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Scottsdale?

A stainless steel chimney liner in Scottsdale typically costs $3,200 to $7,800, with most jobs landing in the middle of that range. Single-story straight flues run lower; two-story homes with offset flues run higher. Call (888) 340-2124 for an exact quote, because estimates are free.

How much does a chimney rebuild cost in Scottsdale?

A partial chimney rebuild in Scottsdale usually costs $4,500 to $14,000, and a full rebuild above the roofline runs $12,000 to $25,000 or more. The range is wide because the scope is wide: how much masonry comes down, what the crown and flashing need, and the roof access all change the price. Call (888) 340-2124 to book an inspection, and the estimate will be based on what’s actually there.

Is it cheaper to repair my liner or replace it?

Repair with HeatShield resurfacing ($1,400 to $3,600) is cheaper than a full reline ($3,200 to $7,800), but only if the flue condition permits it. Cracked or missing clay tiles usually don’t. The inspection is what tells you which option applies. Call (888) 340-2124 and we’ll document what we find before recommending either.

Can you install a liner without a rebuild?

Yes, if the surrounding masonry is sound. A flexible stainless liner or a HeatShield resurfacing can go into a chimney with a good structure and a failing flue. If the masonry itself is failing, a liner won’t last, and a rebuild is the right call. The inspection determines which path applies to your chimney. Call (888) 340-2124 for a free estimate.

Why does a liner cost more on a two-story house?

A two-story home or an offset flue adds $1,600 to $2,400 to a typical liner job, mostly in labor and materials. More height means more liner, more insulation, and more time working from the roof. The written estimate will show exactly where that difference comes from. For an exact number on your home, call (888) 340-2124.

Why Work With a Chimney Specialist

A chimney liner or rebuild is a system job. It involves the flue, the masonry, the crown, the flashing and the cap, and the choices you make on one affect the others. Generalists handle the sweep and refer the repair. We do all three: sweep, inspect and repair, handled by one crew. When you look for a chimney repair in Scottsdale, ask whether the company doing the work is the one that did the inspection. With us, the answer is always yes.

We also reach surrounding communities. If you’re in Fountain Hills, Paradise Valley, Tempe, Mesa, Chandler, Gilbert, Glendale or Phoenix, the same inspection-first process applies. And if you want to understand what the inspection actually covers, read our guide to chimney inspection in Scottsdale.

For a wider view of what chimney work costs across town, including sweeps and smaller repairs, see our chimney repair cost guide and our chimney sweep pricing. For a detailed breakdown of liners alone, our chimney liner cost guide covers sizing, materials and install methods in more depth.

Get a Free Estimate on Your Liner or Rebuild

A liner or rebuild is not a job to compare on price alone. It’s a job to compare on scope, documentation and materials. Every visit from us starts with a look, a written report and a walk-through of the options. You’ll know what’s wrong, what it costs and what’s included before anyone puts a tool to the chimney. There’s no guesswork and no pressure, and estimates are free.

Call (888) 340-2124. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Reach out today and we’ll get an inspection on the schedule.

Pricing reflects the Scottsdale market as of 2026. Scottsdale Chimney Sweep offers free estimates – call (888) 340-2124.

Written by the team at Scottsdale Chimney Sweep.

What Our Customers Say

★★★★★ 4.9 from 7+ reviews

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Sofia Mendoza

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

- Yolanda Hernandez

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Javier Castillo
Need Chimney Cleaning help in Scottsdale? Licensed & insured · free written estimates
Call (888) 340-2124

Request a Free Estimate

Tell us what's going on in Scottsdale. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7